東京大学生産技術研究所　変形加工学研究室

日本語 / English

PUBLICATIONS

審査付学術論文

Peer-reviewed Journal Papers

トップ > 研究業績 >審査付学術論文

研究業績

審査付学術論文

    2025年

  1. T. Kishimoto, K-H. Wang, T. Furushima : Microstructural Evolution of Low Carbon Steel Tubes with Variable Wall Thickness in Dieless Mandrel Drawing, Materials Transaction Vol.66, No, 12 (2025), 1524-1530 https://doi.org/10.2320/matertrans.MT-P2025004
  2. T. Kishimoto, J. Chen, T. Furushima : Experimental and crystal plasticity finite element study of slip-induced free surface roughening of aluminum sheet in uniaxial tensile deformation, Materials & Design　Vol. 260 (2025), 114975. https://doi.org/10.1016/j.matdes.2025.114975
  3. T. Furushima, A. Nakazawa : Misorientation standard deviation as a microstructural factor governing surface roughening in polycrystalline sheets analyzed with crystal plasticity modeling, Computational Materials Science, Vol. 262 (2026), 114327. https://doi.org/10.1016/j.commatsci.2025.114327
  4. X. Liu, G. Ni, G. Chen, X. He, P. Zang, Y. Luo, Q. Fu, J. Li, S. Tang, G. Ni, Z. Jiang, T. Furushima, D. Kent, B. Zhu, T. Wang, H. Li : Degradable Magnesium Implants with Caerin 1.9-Polycaprolactone Coatings Provide Extended Antibacterial Resistance and Outstanding Biocompatibility, Biocompatibility, Biomaterials Research, Vol. 29 (2025), Article 0257. https://doi.org/10.34133/bmr.0257
  5. Q. Zheng, JF. Chen, Y. Yi, P. Du, T. Furushima : Evaluation and modeling of deformation behavior for magnesium alloy tubes by resistance-heating-assisted testing incorporating laser speckle-based digital image correlation system, Materials & Design, Vol. 251 (2025), 113646. https://doi.org/10.1016/j.matdes.2025.113646

    6. 2024年

  6. J. Chen, T. Furushima: Effects of intergranular deformation incompatibility on stress state and fracture initiation at grain boundary: Experiments and crystal plasticity simulations, International Journal of Plasticity, Vol. 180 (2024), 104052. https://doi.org/10.1016/j.ijplas.2024.104052
  7. J. Chen, T. Furushima: On the anisotropic coalescence of elliptic cylindrical voids considering the geometric and distributive properties, International Journal of Plasticity, Vol. 179 (2024), 104036. https://doi.org/10.1016/j.ijplas.2024.104036
  8. T. Inoue, T. Furushima: Novel prediction model for microforming limit curves considering material inhomogeneity based on surface roughening, CIRP Annals, Vol.73, No. 1 (2024), pp. 229-232. https://doi.org/10.1016/j.cirp.2024.04.034
  9. Y. Yi, Q. Zheng, T. Furushima: Study of hot tensile deformation behavior and microstructure characteristics of Zn-22Al microtubes using direct resistance heating-assisted tensile tests, Materials Science and Engineering: A, Vol. 890 (2024), 145893. https://doi.org/10.1016/j.msea.2023.145893
  10. Y. Ikegami, T. Duenki, I. Arakaki, R.Sakai, T. Osaki, S. Ashihara, T. Furushima, Y. Ikeuchi: A simple and inexpensive laser dissection of fasciculated axons from motor nerve organoids, Frontiers in Bioengineering and Biotechnology, Vol. 12 (2024), 1259138, pp. 1-9. https://doi.org/10.3389/fbioe.2024.1259138

    11. 2023年

  11. Y.P. Kokorlis, P. Knysh, K. Sasaki, T. Furushima, M. Knezevic: Deformation-Induced Surface Roughening of an Aluminum–Magnesium Alloy: Experimental Characterization and Crystal Plasticity Modeling, Materials，Vol. 16-16 (2023), 5601. https://doi.org/10.3390/ma16165601
  12. T. Kishimoto, S. Nozawa, T. Furushima: Deformation behavior of β titanium alloy tubes in die-less forming with taper shape control, Journal of Materials Research and Technology, Vol. 26 (2023), 9499-9508. https://doi.org/10.1016/j.jmrt.2023.09.202
  13. S. Kimura, T. Furushima: New small-scale hydromechanical deep-drawing process using die-integrated active high-pressure generation system, International Journal of Material Forming, Vol. 16 (2023), Article Number 46 https://link.springer.com/article/10.1007/s12289-023-01773-0
  14. T. Kishimoto, T. Furushima: Achieving thin wall and high surface quality of magnesium alloy tubes in combined process of hollow sinking after die-less mandrel drawing, International Journal of Material Forming, Vol. 16 (2023), Article Number 29 https://doi.org/10.1007/s12289-023-01750-7
  15. P. Du, T. Kishimoto, T. Furushima: Uniforming outer diameter by control of microstructural evolution for biodegradable ZM21 magnesium alloy tube during dieless drawing, Journal of Materials Processing Technology, Vol. 312 (2023), 117831 https://doi.org/10.1016/j.jmatprotec.2022.117831
  16. Q. Zheng, T. Furushima: High-Temperature Tensile Testing of Micro-scaled Metal Foils Using Rectangular Samples by Resistance Heating-Assisted System Incorporating Digital Image Correlation with Laser Speckles, Journal of Materials Engineering and Performance, Vol. 32 (2023), 8767-8774. https://doi.org/10.1007/s11665-022-07758-5

    17. 2022年

  17. Y. Yi, K. Shinomiya, R. Kobayashi, H. Komine, S. Yoshihara, T. Furushima: A novel superplastic dieless drawing using fracture phenomenon for fabrication of metal tubular microneedles, CIRP Annals, Vol. 71, No. 1 (2022), pp. 237-240. https://doi.org/10.1016/j.cirp.2022.03.037
  18. Y. Yi, H. Komine, T. Furushima: Effect of forming conditions on microstructure and room-temperature mechanical characterization of Zn-22Al superplastic microtubes fabricated by direct extrusion, Materials Science and Engineering: A 844(2022) 143160. https://doi.org/10.1016/j.msea.2022.143160
  19. T. Kishimoto, P. Du, T. Furushima: Effect of microstructure on outer surface roughening of magnesium alloy tubes in die-less mandrel drawing, Journal of Magnesium and Alloys, In Presss. https://doi.org/10.1016/j.jma.2022.02.001

    20. 2021年

  20. P. Du, S. Furusawa, T. Furushima: Continuous observation of twinning and dynamic recrystallization in ZM21 magnesium alloy tubes during locally heated dieless drawing, Journal of Magnesium and Alloys, Vol. 10, No. 3 (2022), pp. 730-742.https://doi.org/10.1016/j.jma.2021.06.001
  21. T. Furushima, M. Yamane: New strain-ratio-independent material constant of free surface roughening for polycrystal sheets in metal forming, CIRP Annals, Vol. 70 (2021), pp. 215-218. https://doi.org/10.1016/j.cirp.2021.04.035
  22. Q. Zheng, T. Furushima: Evaluation of high-temperature tensile behavior for metal foils by a novel resistance heating assisted tensile testing system using samples with optimized structures, Journal of Materials Science & Technology, Vol. 94 (2021), pp. 216-229. https://doi.org/10.1016/j.jmst.2021.03.061
  23. T. Wang, G. Ni, T. Furushima, H. Diao, P. Zhang, S. Chen, C.E. Fogarty, Z. Jiang, X. Liu, H. Li: Mg alloy surface immobilised with caerin peptides acquires enhanced antibacterial ability and putatively improved corrosion resistance, Materials Science and Engineering: C, Vol. 121 (2021) 111819. https://doi.org/10.1016/j.msec.2020.111819

    24. 2020年

  24. A. Milenin, T. Furushima, J. Němeček: Transformation of Surface Roughness of Mg Alloy Tubes During Laser Dieless Drawing, Journal of Materials Engineering and Performance (2020), Vol. 29 (2020), pp. 7735-7743, https://doi.org/10.1007/s11665-020-05234-6
  25. Q. Zheng, N. Mashiwa, T. Furushima: Evaluation of large plastic deformation for metals by a non-contacting technique using digital image correlation with laser speckles, Materials & Design, Vol. 191 (2020) Article 108626, pp. 1-13, https://doi.org/10.1016/j.matdes.2020.108626
  26. H. Yasui, T. Miyagawa, S. Yoshihara, T. Furushima, R. Yamada, Y. Ito: Influence of Internal Pressure and Axial Compressive Displacement on the Formability of Small-Diameter ZM21 Magnesium Alloy Tubes in Warm Tube Hydroforming, Metals, Vol. 10, No. 5 (2020), 674, https://doi.org/10.3390/met10050674
  27. S. Supriadi, T. Furushima, K. Manabe: A Vision-Based Fuzzy Control to Adjust Compression Speed for a Semi-Dieless Bellows-Forming, Metals, Vol. 10, No. 6 (2020), 720,https://doi.org/10.3390/met10060720
  28. A. Milenin, T. Furushima, P. Du, V. Pidvysots’kyy: Improving the workability of materials during the dieless drawing processes by multi-pass incremental deformation, Archives of Civil and Mechanical Engineering, Vol. 20, (2020), Article number: 86. https://doi.org/10.1007/s43452-020-00092-4
  29. T. Furushima, N. Mashiwa: Locally heat-assisted torsion forming of metal tubes for improvement of mechanical properties based on microstructure control, CIRP Annals, Vol. 69, No. 1 (2020), pp. 261-264. https://doi.org/10.1016/j.cirp.2020.04.031
  30. P. Du, S. Furusawa, T. Furushima: Microstructure and performance of biodegradable magnesium alloy tubes fabricated by local-heating-assisted dieless drawing, Journal of Magnesium and Alloys, Vol. 8, No. 3 (2020), pp. 614-623. https://doi.org/10.1016/j.jma.2020.05.009
  31. Q. Zheng, T. Furushima: Enhancement of uniform plastic deformation for pure titanium foils by applying pre-strain combining with resistance heating method for microforming, Journal of Materials Research and Technology, Vol. 9, No. 6 (2020), pp. 12685-12696. (https://doi.org/10.1016/j.jmrt.2020.08.108) https://doi.org/10.1016/j.jmrt.2020.08.108

    32. 2019年

  32. T. Furushima, K. Aoto, S. Alexandrov: A New Compression Test for Determining Free Surface Roughness Evolution in Thin Sheet Metals, Metals, Vol. 9, No. 4 (2019) 451, https://doi.org/10.3390/met9040451
  33. P. Knysh, K. Sasaki, T. Furushima, M. Knezevic, Y. P. Korkolis: A shape interpolation procedure: Application to creating explicit grain structure models based on partial data sets, Computational Materials Science, Vol. 167 (2019) pp. 42-51, https://doi.org/10.1016/j.commatsci.2019.05.014
  34. T. Furushima, T. Nakayama, K. Sasaki: A new theoretical model of material inhomogeneity for prediction of surface roughening in micro metal forming, CIRP Annals - Manufacturing Technology, Vol. 68 (2019) pp. 257-260, https://doi.org/10.1016/j.cirp.2019.04.057
  35. 古島剛，廣瀬雄太郎: ひずみ誘起自由表面あれ進展挙動の共焦点レーザ顕微鏡下その場観察装置の開発, 銅と銅合金, Vol. 58, No. 1 (2019), pp. 228-232

    36. 2018年

  36. H. Li, A. Öchsner, P. K.D.V. Yarlagadda, Y. Xiao, T. Furushima, D. Wei, Z. Jiang, K. Manabe: A new constitutive analysis of hexagonal close-packed metal in equal channel angular pressing by crystal plasticity finite element method, Continuum Mechanics and Thermodynamics, Vol. 30 (2018) 69-82, https://doi.org/10.1007/s00161-017-0583-9
  37. T. Furushima, H. Sato, K. Manabe, S. Alexandrov: Identification of an Empirical Equation for Predicting Free Surface Roughness Evolution in Thin Sheets of Aluminum Alloy and Pure Copper, Journal of Manufacturing Science and Engineering, Vol. 140 (2018) 034501-1-6, https://doi.org/10.1115/1.4038822
  38. A. Milenin, P. Kustra, T. Furushima, P. Du, J. Němeček: Design of the laser dieless drawing process of tubes from magnesium alloy using FEM model, Journal of Materials Processing Technology, Vol. 262 (2018) pp. 65-74, https://doi.org/10.1016/j.jmatprotec.2018.06.018
  39. T. Furushima, K. Manabe: Large reduction die-less mandrel drawing of magnesium alloy micro-tubes, CIRP Annals - Manufacturing Technology, Vol. 67 (2018) pp. 309-312, https://doi.org/10.1016/j.cirp.2018.04.101
  40. 中村崇，古島剛，行武栄太郎，上田聖，榎本正敏，西崎到: 非熱処理系アルミニウム合金A5083-O の高周波誘導加熱を援用した摩擦圧接法の開発， スマートプロセス学会誌，Vol. 7, No. 5 (2018) pp. 207-213, https://doi.org/10.7791/jspmee.7.207

    41. 2017年

  41. T. Furushima, K. Manabe: A novel superplastic dieless drawing process of ceramic tubes, CIRP Annals - Manufacturing Technology, Vol. 66 (2017) pp. 265-268, https://doi.org/10.1016/j.cirp.2017.04.118

    42. 2016年

  42. H.B. Xie, K. Manabe, T. Furushima, K. Tada, Z.Y. Jiang: An experimental and numerical investigation on micro rolling for ultra-thin strip, International Journal of Material Forming, Vol. 9, No. 3 (2016) pp. 405-412, https://doi.org/10.1007/s12289-015-1229-8
  43. H.B. Xie, K. Manabe, T. Furushima, K. Tada, Z.Y. Jiang: Lubrication characterisation analysis of stainless steel foil during micro rolling, The International Journal of Advanced Manufacturing Technology, Vol. 82, (2016), pp. 65-73, https://doi.org/10.1007/s00170-015-7344-3
  44. L. Luo, Z. Jiang, D. Wei, K. Manabe, X. Zhao, T. Furushima: Effects of surface roughness on micro deep drawing of circular cups with consideration of size effects, Finite Elements in Analysis and Design, Vol. 111 (2016) pp. 46-55, https://doi.org/10.1016/j.finel.2015.11.005
  45. P. Kustra, A. Milenin, B. Płonka, T. Furushima: Production Process of Biocompatible Magnesium AlloyTubes Using Extrusion and Dieless Drawing Processes, Journal of Materials Engineering and Performance, Vol. 25 (2016) pp. 2528-2535, https://doi.org/10.1007/s11665-016-2090-8
  46. L. Luo, Z. Jiang, D. Wei, H. Sato, T. Furushima, K. Manabe: A Numerical Study of Micro Hydro Deep Drawing of SUS304 Sheets, Applied Mechanics and Materials, Vol. 846 (2016) pp. 524-529, https://doi.org/10.4028/www.scientific.net/AMM.846.524

    47. 2015年

  47. T. Furushima, Y. Imgawa, K. Manabe, T. Sakai: Effects of Oxidation and Surface Roughening on Drawing Limit in Dieless Drawing Process of SUS304 Stainless Steel Microtubes, Journal of Materials Processing Technology, Vol. 223 (2015), pp. 186-192 (Mar. 2015), https://doi.org/10.1016/j.jmatprotec.2015.03.033
  48. Z.C. Zhang, T. Furushima, K. Manabe, K. Tada, O. Sasaki: Development of dieless metal bellows forming process with local heating technique, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 229, No. 4 (2015), pp. 664-669 (April 2015), https://doi.org/10.1177/0954405413519610
  49. 真鍋　健一，張　自成，古島　剛，高橋　健太: 回転曲げ繰返し強加工によるりん脱酸銅および黄銅管の結晶粒微細化， 銅と銅合金, Vol. 54, No. 1 (2015) pp. 6-10

    50. 2014年

  50. T. Furushima, A. Shirasaki, K. Manabe: Fabrication of noncircular multicore microtubes by superplastic dieless drawing process, Journal of Materials Processing Technology, Vol. 214 (2014), pp. 29-35.(Jan. 2014), https://doi.org/10.1016/j.jmatprotec.2013.07.005
  51. T. Furushima, H. Tsunezaki, K. Manabe, S. Alexandrov: Ductile fracture and free surface roughening behaviors of pure copper foils for micro/meso-scale forming, International Journal of Machine Tools and Manufacture, Vol. 76 (2014), pp. 34-48. (Jan. 2014), https://doi.org/10.1016/j.ijmachtools.2013.10.001
  52. Z.C.Zhang, K. Manabe, T. Furushima, K. Tada, O. Sasaki: Deformation Behavior of Aluminum Alloy Tube in Semi-Dieless Metal Bellows Forming Process with Local Heating Technique, Advanced Materials Research, Vol. 936 (2014), pp. 1742-1746. (June 2014), https://doi.org/10.4028/www.scientific.net/AMR.936.1742
  53. Z.C.Zhang, K. Manabe, T. Furushima, K. Tada: Formulation of Equivalent Plastic Strain Accumulated in Rotating Bending Process of Metal Tubes for Severe Plastic Deformation, Advanced Materials Research, Vol. 887-888, (2014) pp. 907-911 (Apr. 2014), https://doi.org/10.4028/www.scientific.net/AMR.887-888.907

    54. 2013年

  54. Z.C. Zhang, K. Manabe, T. Furushima, K. Tada: Development of Cyclic Rotating Bending Process for Microstructure Control of AZ31 Magnesium Alloy Tube, Advanced Materials Research, Vol. 652-654 (2013) pp. 1956-1960, https://doi.org/10.4028/www.scientific.net/AMR.652-654.1956
  55. T. Furushima, N.Q. Hung, K. Manabe, O. Sasaki: Development of semi-dieless metal bellows forming process, Journal of Materials Processing Technology, Vol. 213 (2013), pp. 1406-1411.(Aug. 2013), https://doi.org/10.9773/sosei.53.251

    56. 2012年

  56. T. Furushima, T. Ikeda, K. Manabe: Deformation and Heat Transfer Analysis for High Speed Dieless Drawing of AZ31 Magnesium Alloy Tubes, Advanced Materials Research, Vols. 418-420 (2012) pp. 1036-1039 (Dec. 2011), https://doi.org/10.4028/www.scientific.net/AMR.418-420.1036
  57. T. Furushima, T. Masuda, K. Manabe, S. Alexandrov: Inhomogeneous 3D Finite Element Model for Prediction of Free Surface Roughening, Advanced Materials Research, Vols. 418-420 (2012) pp. 1040-1043(Dec. 2011), https://doi.org/10.4028/www.scientific.net/AMR.418-420.1040
  58. 古島　剛, N. Q. Hung, 真鍋　健一, 佐々木　修: セミダイレスベローズ成形法に関する研究, 日本塑性加工学会誌（塑性と加工）, Vol. 53, No. 614 (2012) pp. 251-255 (Mar. 2012), https://doi.org/10.9773/sosei.53.251
  59. S. Supriadi, T. Furushima, K. Manabe: Real-Time Process Control System of Dieless Tube Drawing with an Image Processing Approach, Materials Transactions, Vol.53 No.05 (2012) pp.862-869, https://doi.org/10.2320/matertrans.MF201118
  60. K. Manabe, H. Sato, T. Furushima, D. Wei, N. Mathew, Z. Jiang: Deformation Behavior in Micro Sheet Hydroforming Process, Steel Research International, Special Edition (2012) pp.651-654
  61. T. Furushima, K. Manabe: Workability of AZ31 Magnesium Alloy Tubes in Dieless Drawing Process, Steel Research International, Special Edition (2012) pp.851-854
  62. T. Furushima, H. Tsunezaki, K. Manabe, S. Alexandrov: Fracture Prediction in Micro Sheet Forming Using Ductile Fracture Criterion, Steel Research International, Special Edition (2012) pp.1183-1186

    63. 2011年

  63. S. Alexandrov,K. Manabe, T. Furushima: A New Empirical Relation for Free Surface Roughening, Journal of Manufacturing Science and Engineering (Transactions of the ASME), Vol. 133 014503-1-5 (Feb. 2010), https://doi.org/10.1115/1.4003477
  64. 古島　剛，白崎　篤，真鍋　健一: 超塑性ダイレス引抜きによるマイクロ異形集合管の創製, 日本塑性加工学会誌（塑性と加工）, Vol. 52 No. 602, pp. 380-384 (Mar. 2011), https://doi.org/10.9773/sosei.52.380
  65. S. Alexandrov,K. Manabe, T. Furushima: A general analytic solution for plane strain bending under tension for strain hardening material at large strains, Archive of Applied Mechanics, Vol. 81, No. 12,pp. 1935-1952 (Mar. 2011), https://doi.org/10.1007/s00419-011-0529-9
  66. 古島　剛，真鍋　健一，石橋　明彦，日名子　伸明，白井　崇: 銅合金管の高速ダイレス引抜きにおける温度分布の有限要素解析, 銅と銅合金, Vol. 50 No. 1, Accepted (Aug. 2011)
  67. T. Furushima, T. Ikeda, Y. Noda, K. Manabe: Deformation and Heat Transfer Analysis of Dieless Drawing Process for Metal Tube, Steel research International, Vol. 82, Special edition, pp. 302-307 (Sep. 2011), https://doi.org/10.4028/www.scientific.net/AMR.418-420.1036
  68. S. Supriadi, N. Q. Hung, T. Furushima, O. Sasaki, K. Manabe: A Novel Dieless Bellows Forming Process Using Local Heating Technique, Steel research International,Vol. 82, Special edition, pp. 950-955 (Sep. 2011)
  69. H.N. Lu, D.B. Wei, Z.Y. Jiang, K. Manabe, T. Furushima: Study on Size Effect in Micro Cross Wedge Rolling, Steel research International,Vol. 82, Special edition, pp. 962-967 (Sep. 2011)
  70. T. Furushima, T. Masuda, K. Manabe, S. Alexandrov: Prediction of Free Surface Roughening by 2D and 3D Model Considering Material Inhomogeneity, Journal of Solid Mechanics and Materials Engineering, Vol. 5, No. 12 (2011), pp.978-990 (Dec. 2011), https://doi.org/10.1299/jmmp.5.978
  71. S. Supriadi, T. Furushima, K. Manabe: Development of Precision Profile Control System with Fuzzy Model and Correction Function for Tube Dieless Drawing, Journal of Solid Mechanics and Materials Engineering, Vol. 5, No. 12 (2011), pp.1059-1070 (Dec. 2011), https://doi.org/10.1299/jmmp.5.1059

    72. 2010年

  72. T. Furushima，Y. Noda，K. Manabe: Experimental Study on Effective Heating Conditions for High Speed Dieless Tube Drawing Process, Steel research international, Vol. 81 No. 9, pp.502-505 (Sep. 2010)
  73. S. Alexandrov, T. Furushima, K. Manabe: A Theoretical-Experimental Approach for Improving the Predictive Capacity of Models for Free Surface Roughness Evolution in Metalforming Processes Under Plane Strain Conditions, Steel research international, Vol. 81 No. 9, pp. 1454-1457 (Sep. 2010)
  74. 古島　剛，真鍋　健一: ダイレス引抜きによるAZ31マグネシウム合金極細管の創製, 日本塑性加工学会誌（塑性と加工）, Vol. 51 No. 597, pp. 72-74 (Oct. 2010), https://doi.org/10.9773/sosei.51.990
  75. 古島　剛，真鍋　健一，石橋　明彦，日名子　伸明，白井　崇: 内面溝付銅管のダイレス引抜きにおける加熱温度と引抜き速度条件による結晶組織の変化, 銅と銅合金, Vol. 49 No. 1, pp. 232-236 (Aug. 2010)
  76. T. Furushima, K. Manabe: Experimental and Numerical Study on Dieless Drawing Process of Aluminum Alloy Extruded Tubes with Double Hollow Section, Journal of the Chinese Society of Mechanical Engineers, Vol. 31, No. 2, pp. 99-105 (2010)
  77. T. Furushima, Y. Noda, K. Manabe: Effective Heating Conditions for High Speed Dieless Tube Drawing Process, Steel research international, Vol. 81 No. 9 (2010) pp. 502-505
  78. 古島　剛, 真鍋　健一, 石橋　明彦, 日名子　伸明, 白井　崇: ダイレス引抜き加工の内面溝付銅管への適用, 銅と銅合金, Vol. 49 No.1 (2010) pp. 232-236

    79. 2009年

  79. T. Furushima, K. Nakata, K. Manabe, S. Alexandrov: Constitutive Modeling of Free Surface Roughening in Sheet Metal Considering Mesoscopic Inhomogeneity Based on Hardness Distribution, Journal of Solid Mechanics and Materials Engineering, Vol. 3, No. 12, pp. 1285-1296 (2009), https://doi.org/10.1299/jmmp.3.1285
  80. T. Furushima, K. Manabe: Finite Element Simulation with Coupled Thermo-mechanical Analysis of Superplastic Dieless Tube Drawing Considering strain Rate Sensitivity, Materials Transactions, Vol. 50, No. 1, pp. 161-166 (2009), https://doi.org/10.2320/matertrans.P-MRA2008837
  81. T. Furushima, S. Hirose, K. Manabe: Effective Temperature Distribution and Drawing Speed Control for Stable Dieless Drawing Process of Metal Tubes, Journal of Solid Mechanics and Materials Engineering, Vol. 3, No. 2 (2009) pp. 236-246, https://doi.org/10.1299/jmmp.3.236

    82. 2008年

  82. T. Furushima, K. Manabe, T. Sakai: Fabrication of Superplastic Microtubes Using Dieless Drawing Process, Materials Transactionsg, Vol. 49, No. 6, pp. 1365-1371 (2008), https://doi.org/10.2320/matertrans.P-MRA2008810
  83. T. Furushima, K. Manabe: FE analysis of size effect on deformation and heat transfer behavior in microtube dieless drawing, Journal of Materials Processing Technology, Vol. 201, pp. 123-127 (2008), https://doi.org/10.1016/j.jmatprotec.2007.11.229

    84. 2007年

  84. 古島　剛，真鍋　健一，新井　淳，石橋　明彦，日名子　伸明，白井　崇: ダイレス引抜き加工の内面溝付銅管への適用, 銅と銅合金, Vol. 46, No. 1, pp. 111-115 (2007)
  85. 古島　剛，真鍋　健一: アルミニウム合金押出し異形中空形材のダイレス引抜き, 軽金属, Vol. 57, No. 8, pp. 351-356 (2007), https://doi.org/10.2464/jilm.57.351
  86. 古島　剛，清水　徹英，真鍋　健一: 強ひずみ変形によるAZ31マグネシウム合金素形管材の結晶粒微細化とその超塑性特性評価, 日本塑性加工学会誌（塑性と加工）, Vol. 48, No. 556, pp. 412-416 (2007), https://doi.org/10.9773/sosei.48.412
  87. T. Furushima, K. Manabe: Experimental Study on Multi-Pass Dieless Drawing Process of Superplastic Zn-22％Al Alloy Microtubes, Journal of Materials Processing Technology, Vol. 187-188, pp. 236-240 (2007), https://doi.org/10.1016/j.jmatprotec.2006.11.2049
  88. T. Furushima, K. Manabe: Experimental and Numerical Study on Deformation Behavior in Dieless Drawing Process of Superplastic Microtubes, Journal of Materials Processing Technology, Vol. 191, pp. 59-63 (2007), https://doi.org/10.1016/j.jmatprotec.2007.03.0849
  89. 古島　剛，真鍋　健一: ひずみ速度感受性の温度依存性を考慮した超塑性ダイレスチューブ引抜きの熱－変形連成FEM解析, 日本塑性加工学会誌（塑性と加工）, Vol. 48, No. 552, pp. 51-55 (2007), https://doi.org/10.9773/sosei.48.51

    90. 2006年

  90. 古島　剛，真鍋　健一，酒井　孝: 超塑性ダイレス引抜きによるマイクロチューブの創成実験, 日本塑性加工学会誌（塑性と加工）, Vol. 47, No. 548, pp. 870-874 (2006), https://doi.org/10.9773/sosei.47.870
  91. T. Sakai, T. Furushima, K. Manabe, H. Morimoto, E. Nakamachi: Crystallographic Orientation Observation and Mechanical Properties Evaluation of Fine-Grained Pure Aluminum, JSME International Journal (Japan Society of Mechanical Engineers), Ser. A, Vol. 49, No. 2, pp. 216-219 (2006), https://doi.org/10.1299/jsmea.49.216

研究業績

ページのトップへ戻る