東京大学生産技術研究所　変形加工学研究室

トップ > 研究業績 >国際会議発表

研究業績

審査付国際会議発表論文

    2018年

  1. T. Furushima, Y. Hirose: Development of In-situ Observation Methods of Surface Roughening Behavior By Hand-size Stretching Test for Metal Foils, Journal of Physics: Conference Series, Vol. 1083, Conf. 1, (2018) 012130 doi :10.1088/1742-6596/1063/1/012130 (Proc. 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes(NUMISHEET2018))
  2. P. Knysh1, K. Sasaki, T. Furushima, M. Knezevic, Y.P. Korkolis: Deformation-induced surface roughening of an Al-Mg alloy, Journal of Physics: Conference Series, Vol. 1083, Conf. 1, (2018) 012132 doi :10.1088/1742-6596/1063/1/012132 (Proc. 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes(NUMISHEET2018))
  3. T. Furushima, H. Tsunezaki, Y. Hirose: Fracture and surface roughening behaviors in micro metal forming, Procedia Manufacturing, Vol. 15 (2018), pp. 1481-1486 (Proc. Metal Forming2018)
  4. Z. Zhang, N. Chen, T. Furushima, B. Li: Deformation behavior of metal foil in micro pneumatic deep drawing process, Procedia Manufacturing, Vol. 15 (2018), pp. 1422-1428 (Proc. Metal Forming2018)
  5. I. Indhiarto, T. Shimizu, T. Furushima, M. Yang: Effect of DC pulsed-current on deformation behavior of magnesium alloy thin sheets, Procedia Manufacturing, Vol. 15 (2018), pp. 1663-1670 (Proc. Metal Forming2018)
  6. A. Milenin, P. Kustra, P. Du, S. Furusawa, T. Furushima: Computer aided design of the laser dieless drawing process of tubes from magnesium alloy with take into account ductility of the material, Procedia Manufacturing, Vol. 15 (2018), pp. 302-310 (Proc. Metal Forming2018)

    7. 2017年

  7. T. Furushima: Development of Rotary Laser Dieless Forming Apparatus for Micro Metal Bellows, Proc. the 8th International Conference on Tube Hydroforming (TUBEHYDRO2017), (2017) pp. 48-51
  8. Z. Zhang, Y. Xu, T. Furushima, X. Kong, K. Manabe: Deformation Behavior and Microstructure Evolution of TRIP Seamless Steel Tube in Hydraulic Bulge Process, Proc. the 8th International Conference on Tube Hydroforming (TUBEHYDRO2017), (2017) pp. 221-226
  9. T. Furushima, Y. Hirose, K. Tada, K. Manabe: Development of Compact Marchiniak Testing Apparatus for In-situ Microscopic Observation of Surface Roughening, Procedia Engineering Vol. 207 (2017) pp. 1946-1951. (Proc. The 12th International Conference on Technology of Plasticity (ICTP2017))

    10. 2016年

  10. N. Mashiwa, T. Furushima, K. Manabe: Novel Non-Contact Evaluation of Strain Distribution Using Digital Image Correlation with Laser Speckle Pattern of Low Carbon Steel Sheet, Procedia Engineering, Vol. 184 (2017) pp. 16-21 (Proc. Advances in Materials and Processing Technologies (AMPT2016))
  11. K. Matsushita, T. Furushima, K. Tada, K. Manabe: Spring-in Behavior of Crystalline CFRTP Sheet after Thermal U-bending, Procedia Engineering, Vol. 184 (2017) pp. 560-566 (Proc. Advances in Materials and Processing Technologies (AMPT2016))
  12. H. Sato , K. Manabe, T. Furushima, D. Wei, Z. Jiang, S. Alexandrov: On the Scale Dependence of Micro Hydromechanical Deep Drawing, Key Engineering Materials, Vol.725 (2016) pp.689-694 (Proc. 13th Asia-Pacific Symposium on Engineering Plasticity and Its Application (AEPA2016))

    13. 2015年

  13. T. Furushima, K. Manabe: Heat Assisted Dieless Drawing Process of Superplastic Metal Microtubes - From Zn22Al to β Titanium Alloys, Materials Science Forum, Vols. 838-839 (2016) pp. 459-467 (Proc. 12th International Conference on Superplasticity in Advanced Materials (ICSAM) 2015)
  14. T. Furushima, Y. Hirose, K. Tada, K. Manabe: Development of Superplastic Dieless Drawing Apparatus for 3Y-TZP Zirconia Ceramic Tube, Materials Science Forum, Vols. 838-839 (2016) pp. 597-602 (Proc. 12th International Conference on Superplasticity in Advanced Materials (ICSAM) 2015)
  15. T. Furushima, R. Kitamura, K. Manabe: Development of Laser Assisted Dieless Forming Apparatus for Fabrication of Micro Metal Bellows, Proc. the 7th International Conference on Tube Hydroforming (TUBEHYDRO2015), (2015) pp. 326-331

    16. 2014年

  16. T. Furushima, K. Manabe, S. Alexandrov: Size effects on free surface roughening and necking behavior of metal thin sheets using inhomogeneous finite element material model, AIP Conference Proceedings (NUMISHEET 2014: The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes), 1567 (2014) pp. 460-463
  17. H.B. Xie, K. Manabe, T. Furushima, Z.Y. Jiang: The study on deformation characterization in micro rolling for ultra-thin strip, AIP Conference Proceedings, 1567 (2014) pp. 888-891 (NUMISHEET 2014: The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes)
  18. T. Furushima, T. Masuda, K. Manabe, S. Alexandrov: Experimental study on anisotropy of free surface roughening behavior for metal sheets in uni-axial tensile test, Proc. the JSME/ASME 2014 International Conference on Materials and Processing (ICMP2014), CD-ROM (ICMP2014-5036)
  19. T. Furushima, Y. Imagawa, S. Furusawa, K. Manabe: Development of Rotary Laser Dieless Drawing Apparatus for Metal Microtubes, Key Material Engineering, Vol. 626 (2015) pp. 372-376) (Proc. Advance in Engineering Plasticity XII (12th Asia-pacific Conference on Engineering Plasticity and its Application (AEPA2014))
  20. T. Furushima, K. Manabe, S. Alexandrov: Mesoscopical inhomogeneous material modeling for micro metal forming, AIP Conference Proceedings, 1618 (2014) pp. 331-334 (11th International Conference of Computational Methods in Science and Engineering (ICCMSE2014))
  21. T. Furushima, Y. Imagawa, S. Furusawa, K. Manabe: Deformation Profile in Rotary Laser Dieless Drawing Process for Metal Microtubes, Procedia Engineering, Vol. 81 (2014), pp. 700-705 (Proc. 11th International Conference on Technology of Plasticity, ICTP 2014)
  22. H. Xie, K. Manabe, T. Furushima, K. Tada, Z.Jiang: Deformation Characterization of Micro Rolling for Stainless Steel Foil, Procedia Engineering, Vol. 81 (2014), pp. 179-184 (Proc. 11th International Conference on Technology of Plasticity, ICTP 2014)

    23. 2013年

  23. T. Furushima, H. Tsunezaki, T. Nakayama, K. Manabe, S. Alexandrov: Prediction of Surface Roughening and Necking Behavior for Metal Foils by Inhomogeneous FE Material Modeling, Key Engineering Materials, Vol. 554-557 (2013), pp. 169-173 (Proc. 16th annual ESAFORM Conference on Material Forming (ESAFORM2013))
  24. T. Furushima, H. Tsunezaki, K. Manabe, M. Yang, S. Alexandrov: Influence of free surface roughening on ductile fracture behavior under uni-axial tensile state for metal foils, Proc. 13th International Conference on Fracture (ICF13), (2013) USB memory (S41-017)
  25. S. Supriadi, T. Furushima, K. Manabe: Real-time Monitoring System for Dieless Bellows Forming using Machine Vision, Proc. the 13th International Conference on QIR (Quality in Research), (2013) pp. 97-103
  26. T. Furushima, Y. Suzuki, K.Manabe, O. Sasaki: Convolution Formation Behavior of Semi-dieless Bellows Forming Process for Metal Tubes, Proc. the 6th International Conference on Tube Hydroforming, (2013), pp. 268-274
  27. Z.Zhang, T. Furushima, K. Manabe, K. Tada, O. Sasaki: Development of Dieless Bellows Forming Process with Local Heating Technique, Proc. the 6th International Conference on Tube Hydroforming, (2013), pp. 275-279

    28. 2011年

  28. T. Furushima, T. Masuda, K. Manabe: FE Simulation Considering Mesoscopic Material Inhomogenetiy For Prediction of Free Surface Roughening, Proc. the 6th International Conoference on Micromanufacturing, Tokyo, Japan, pp. 549-552 (Mar. 2011)
  29. T. Furushima, T. Masuda, K. Manabe, S. Alexandrov: Prediction of Free Surface Roughening by 2D and 3D FE Model Considering Material Inhomogeneity, Proc. the JSME/ASME 2011 International Conference on Materials and Processing (ICM&P2011), Oregon, USA, ICMP2011-51123 (June 2011)
  30. S. Supriadi, T. Furushima, K. Manabe: Development of Precision Profile Control System with Fuzzy Model and Correction Function for Tube Dieless Drawing, Proc. the JSME/ASME 2011 International Conference on Materials and Processing (ICM&P2011), Oregon, USA, ICMP2011-51023 (June 2011)
  31. S. Supriadi, T. Furushima, K. Manabe: Shape Control Technique for Various Forming Conditions in Dieless Tube Forming, Proc. International Conference on Material Processing Technology 2011, Phuket, Thailand, pp. 157-161 (June 2011)
  32. T. Furushima, N. Q. Hung, K. Manabe, O. Sasaki: Fabrication of Metal Bellows Using Semi-Dieless Compression Technique, Proc. The 5th International Conference on Tube hydroforming (TUBEHYDRO2011), Hokkaido, Japan, pp. 116-120 (July 2011)
  33. S. Supriadi, T. Furushima, K. Manabe: Real-time Process Control System of Dieless Tube Drawing with An Image Processing Approach, Proc. The 5th International Conference on Tube hydroforming (TUBEHYDRO2011), (2011) pp. 92-95
  34. H. Lu, D. Wei, Z. Jiang, K. Manabe, T. Furushima: Analysis of Micro Cross Wedge Rolling of Metals, Proc. The 5th International Conference on Tube hydroforming (TUBEHYDRO2011), (2011) pp. 187-190
  35. S. Alexandrov, K. Manabe, T. Furushima: Free Surface Roughness Prediction in Bending Under Tension, Prof. The 8th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET2011), (2011) pp. 1167-1174

    36. 2010年

  36. T. Furushima，Y. Noda，K. Manabe: Experimental Study on Effective Heating Conditions for High Speed Dieless Tube Drawing Process, Proc. the 13th International Conference on Metal Forming (Metal forming2010),Toyohashi, Japan, Vol. 81 No. 9, pp. 502-505 (Sep. 2010)
  37. T. Furushima, T. Shimizu, K. Manabe: Grain Refinement by Combined ECAE/Extrusion and Dieless Drawing Processes for AZ31 Magnesium Alloy Tubes, Proc. the 7th Pacific Rim International Conference on Advanced Materials and Processing (PRICM7), Cairns, Australia, pp. 735-738 (Aug. 2010)
  38. T. Furushima, T. Masuda, K. Manabe: In-situ observation and anisotropy of Free Surface Roughening for Polycrystalline metal, Proc. the 9th Asia-Pacific Conference on Materials Processing (APCMP2010), Sydney, Australia, pp. 450-455 (Jun. 2010)
  39. T. Furushima, Y. Noda, K. Manabe: Laser Dieless Drawing Process for Metal Micro-tubes, Proc. the 9th Asia-Pacific Conference on Materials Processing (APCMP2010), Sydney, Australia, pp. 699-704 (Jun. 2010)

    40. 2009年

  40. T. Furushima, K. Manabe: Experimental and Numerical Study on Dieless Drawing Process of Aluminum Alloy Extruded Tubes with Double Hollow Section, Proc. 4th International Conference on Tube Hydroforming (Tubehydro2009), pp.264-269 (Sep. 2009)
  41. T. Furushima, K. Nakata, K. Manabe, S. Alexandrov: FE Modeling of Free Surface Roughening in Sheet Metal Considering Mesoscopic Inhomogeneity Based on Hardness Distribution, Proc. 2nd Asian Symposium on Material & Processing (ASMP09), CD-ROM (June. 2009)
  42. T. Furushima, S. Hirose, K. Manabe: Effective Temperature Distribution and Drawing Speed Control for Stable Dieless Drawing Process of Metal Tubes, Journal of Solid Mechanics and Materials Engineering, Vol. 3, No. 2, pp. 236-246 (2009)

    43. 2008年

  43. T. Furushima, S. Hirose, K. Manabe: Effective Temperature Distribution and Drawing Speed Control for Stable Dieless Drawing Process of Metal Tubes, Proc. 3rd JSME/ASME International Conference on Materials and Processing, CD-ROM (Paper No. MSEC_ICMP2008-72377) (Oct. 2008)
  44. T. Furushima, K. Manabe: A Novel Processing for Microtubes -Superplasti Dieless Drawing Technique-, Advanced Technology Plasticity 2008 (Proc. The 9th International Conference on Technology of Plasticity) (ICTP 2008), Gyeongju, Korea, pp.205-210 (Sep. 2008)
  45. S. Alexandrov, K. Manabe, T. Furushima: Development of Free Surface Roughness in Expanding/Contracting Cylinders, Proc. 9th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA 2008) Israel, CD-ROM (Paper No. ESDA2008-59138)(July. 2008)
  46. T. Furushima, K. Manabe, S. Alexsandrov: Effect of Statistical Distribution of Grain Properties on Development of Free Surface Roughness, Proceedings of the XXXVI International Summer School, Advanced Problems in Mechanics Conference (APM 2008) St. Petersburg, Russia, pp.228-236 (July. 2008)
  47. E. Lyamina, T. Furushima: Influence of Parameters of Model for Material Grains on Development of Free Surface Roughness, Proc. MIKMUS-2008, pp.60-65 (Apr. 2008)

    48. 2007年

  48. T. Furushima, K. Manabe: FE Analysis of Size Effect on Deformation and Heat Transfer Behavior in Microtube Dieless Drawing, Proc. Advances in Materials and Processing Technologies 2007 (AMPT2007) Dejoen, Korea, pp. 275-283 (Oct. 2007)
  49. T. Furushima, S. Aleksandrov, K. Manabe： Roughness Evolution on Free Surfaces of Micro Material with Strain Rate Sensitivity in Dieless Forming, Proc. 2nd Int. Conf. on New Forming Technology (2nd ICNFT) Bremen, Germany, pp. 69-77 (Sep. 2007)
  50. T. Furushima, K. Manabe: FE Simulation of Dieless Drawing Process for Small-Size Non-circular Tubes, Proc. 9th Int. Conf. on Numerical Methods in Industrial Forming Processes (NUMIFORM2007) Porto, Portugal, pp. 1603-1608 (June. 2007)

    51. 2006年

  51. T. Furushima, K. Manabe: Experimental Study On Multi-Pass Dieless Drawing Process of Superplastic Zn-22％ Al Alloy Microtubes, Proc. 3rd Int. Conf. on Advanced Forming and Die Manufacturing Technology (AFDM2006) Busan, Korea, CD-ROM (Sep. 2006)
  52. T. Furushima, K. Manabe: Experimental and Numerical Study on Deformation Behavior in Dieless Drawing Process of Superplastic Microtubes, Proc. Advances in Materials and Processing Technologies 2006 (AMPT2006) Las Vegas, USA, CD-ROM (July-Aug. 2006)

    53. 2005年

  53. T. Sakai, R. Takahashi, T. Furushima, K. Manabe, H. Morimoto, E. Nakamachi: Crystallographic Orientation Observation and Mechanical Properties Evaluation of Fine- Grained Pure Aluminum, Proc. 8th Int. Conf. on Technology of Plasticity (ICTP2005)Verona, ITALY, CD-ROM (Oct. 2005)

    54. 2004年

  54. T. Furushima, T. Sakai, K. Manabe: Finite Element Modeling of Dieless Tube Drawing of Strain Rate Sensitive Material with Coupled Thermo-Mechanical Analysis, Proc. 8th Int. Conf. on Numerical Methods in Industrial Forming Processes (NUMIFORM2004) Ohio, USA, pp. 522-527 (Jun. 2004)

査読なし国際会議発表論文

    2017年

  1. Kanta SASAKI, Yannis P. Korkolis, Koji Kakehi, Tsuyoshi FURUSHIMA : Investigation of deformation-induced surface roughening based on microstructure analysis in polycrystalline metal sheets, The 10th Asian Workshop on Micro/Nano Forming Technology (AWMFT2017), (2017)
  2. Hejie Li, Ken-ichi Manabe, Andreas Öchsner, Kazuo Tada, Zhengyi Jiang, Tsuyoshi Furushima: Influence of different deformation routes on the mechanical properties and microstructures of micro-ECAP processed pure Mg specimen, The 10th Asian Workshop on Micro/Nano Forming Technology (AWMFT2017), (2017) (invited)
  3. Hejie Li, Ken-ichi Manabe, Andreas Ö chsner, Zhengyi Jiang, Tsuyoshi Furushima: Development on the Technologies and Applications of the Equal Channel Angular Pressing, The 1st Asia Pacific Symposium on Technology of Plasticity (APSTP 2017)，(2017)
  4. Tsuyoshi Furushima, Shusaku Furusawa, Ken-ichi Manabe: Development of Multi-Pass Laser Dieless Drawing System for Fabrication of Microtube, The 1st Asia Pacific Symposium on Technology of Plasticity (APSTP 2017) ，(2017)

    5. 2015年

  5. T. Furushima, Y. Imagawa, T. Sakai, K. Manabe: Development of Laser Dieless Torsion Drawing Apparatus for Metal Microtubes, Proc. the 8th Asian Workshop on Nano/Micro Forming Technology (AWMFT2015), (2015) USB memory (J4)
  6. T. Furushima, Y. Hirose, K. Tada, K. Manabe: Development of Small Marciniak Testing Apparatus for In-situ Observation of Surface Roughening and Fracture Behaviors, Proc. the 8th Asian Workshop on Nano/Micro Forming Technology (AWMFT2015), (2015) USB memory (J19)

    7. 2013年

  7. T. Furushima, K. Manabe, S. Alexandrov: Study on Mesoscopical Inhomogeneous Material Modeling for Surface Roughening Behavior of Polycrystalline Metal Sheets and Foils, Proc. the 13th International Conference on QIR (Quality in Research), (2013) pp. 2
  8. T. Furushima, T. Nakayama, K. Manabe, S. Alexandrov, Z. Jiang, H. Lu, D. Wei: Experimental and Numerical Study on Surface Roughening Behavior in Micro Deep Drawing, Proc. the 6th Asian Workshop on Nano/Micro Forming Technology (AWMFT2013), (2013) pp. 40-43
  9. H. Xie, K. Manabe, T. Furushima, K. Tada: Coupled experimental analysis of deformation characterization of thin strip in micro rolling mill, Proc. the 6th Asian Workshop on Nano/Micro Forming Technology (AWMFT2013), (2013) pp. 48-49)

    10. 2012年

  10. T. Furushima, H. Tsunezaki, K. Manabe, S. Alexandrov: Free Surface Roughening and Ductile Fracture of Metal Foils in Micro Metal Forming, Proc. the 3rd Asian Symposium on Materials & Processing (ASMP 2012), (2012) CD-ROM

    11. 2011年

  11. T. Furushima, Y. Noda, K. Manabe: Micro Laser Dieless Drawing Process of Copper Alloy Tubes, Proc. 4th Asian Workshop on Nano/Micro Forming Technology (AWMFT2011), (2011) pp. 37-38

    12. 2010年

  12. T. Furushima，Y. Noda，K. Manabe: Laser Dieless Drawing Process for Metal Microtubes, Proc. the International Conference on Material Processing Technology 2010 (MAPT2010), Bangkok, Thailand, pp. 64-67 (Jan. 2010)
  13. T. Furushima，Y. Esaka，K. Manabe: Fabrication of Small Taper-needles Using Dieless Drawing Process with Drawing Speed Control, Proc. the International Conference on Material Processing Technology 2010 (MAPT2010), Bangkok, Thailand, pp. 68-71 (Jan. 2010)

    14. 2009年

  14. T. Furushima, Y. Noda, K. Manabe: Effect of Drawing Speed on Deformation Behavior in Dieless Drawing of Metal Microtubes, Proceedings of AWMFT-2009, Changsha, China (Oct. 2009)
  15. T. Furushima, K. Manabe, S. Alexandrov: 3D Finite Element Model Considering Microscopic Material Inhomogeneity for Prediction of Free Surface Roughening Under Tensile Deformation, Proceedings of AWMFT-2009, Changsha, China (Oct. 2009)

    16. 2007年

  16. T. Furushima, K. Manabe, S. Aleksandrov： FE Mesoscopic Analysis of Roughness Evolution on Free Surface of Thin Sheet Metals with Strain Rate Sensitivity, Proc. Asian Workshop on Nano/Micro Forming Technology, Hokkaido, Japan, pp. 13-14 (Oct. 2007)

    17. 2003年

  17. T. Sakai, T. Furushima, K. Manabe, H. Morimoto, E. Nakamachi: Crystallographic Orientation Observation and Mechanical Properties Evaluation of Fine Grained Pure Aluminum, Proc. 2nd Int. Sympo. on Ultrafine Grained Structure (ISUGS2003) Victoria, AUSTRALIA, CD-ROM (Nov. 2003)

研究業績

ページのトップへ戻る